How to Programming a Subaru Key Fob at Home

Depending on how brand new your Subaru is, you may need to have your key fob programmed by an automotive locksmith. This is accomplished through the connection of a computer programming machine to your vehicle.

To program your Subaru begin by opening the driver's door using the door button control, and then close it. You will hear a chime from the instrument panel, and the dome lights will blink.

Step 1: Locate your transmitter circuit board

There are many ways to program your key fob. First, you need to determine the type of key fob that you own. You can do this by studying the shape of the key fob, or by listening to the car's sound.

Once you have the information you require, you can start the process of programming your key fob at home. You'll require an aluminum flathead and a key to complete this. The key fob can be opened by twisting. Then push the key made of metal into the case and then release the battery from the tiny tabs that hold it in place. Replace the battery with a new one and then put the key fob case back together.

Step 2: Remove the key fob case

Change the battery is a good idea, as it can help revive key fobs which aren't working anymore. However, there are instances where the buttons on the key fob could be damaged. If you notice the metal contacts on the button have been damaged You can try the process of re-soldering them to ensure that they function properly.

Be sure to turn off your ignition and close your doors prior to you begin. Close the door on the driver's side and press your door button 10 times in rapid succession. After that, you'll hear the instrument panel chime, and your dome lights will flash. This means you're ready to move on.

Step 3: Put the Key Fob in the ignition

There are many articles on the internet that will show you the steps to program a new or replacement Subaru key fob at home, but the majority of them aren't very specific. A professional auto dealer or locksmith in Fort Bliss is the best option to reprogram an electronic car key.

Sit in the driver's seat of your subaru smart key replacement with the engine off and the doors closed. The door button control should be opened and use it to unlock all doors. Open and close the driver's door two times more. Replace and replace the ignition key (don't turn it) 10 times in 40 seconds. The system should chirp to confirm that the settings have changed.

Step 4: Turn on the ignition

It is essential to realize that this method of programming a key fob works if you already have a working key. If you do not, then a dealership or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

After your key has been programmed and you are able to start your car in about five seconds. Begin by closing the doors and then shutting off the engine. Then, sit in the driver's seat and unlock all doors using the door button control. Place the key in the ignition and then turn it to the first position. The electrical systems will be activated however, the engine remains in neutral. Repeat this process 10 times.

Step 5 Step 5: Unlock the driver's Door

Subaru offers a wide range of premium cars equipped with key fobs that can lock and unlock doors and start the car and defrost the windows. These gadgets can sometimes stop functioning.

Find a locksmith or dealer to resolve the issue. This will fix the problem and ensure that your vehicle is secure.

You must first open and close the door to the driver's side. Place the key into the ignition, and turn it until it is in position 1. Then, reverse it to the off position. Repeat this ten times in the row as fast as possible. After the tenth repetition you will hear a chime.

Step 6: Press the Lock/Unlock button on the Driver's Door

The procedure for replacing the battery in a Subaru remote key fob is very simple. First, you must open the exterior fob casing. Then you can use a flathead screwdriver to push open the interior case and take out the old battery.

After taking out the old battery, insert the new subaru key fob one and close the case. Next, sit in the driver's seat and unlock all doors by using the door button control. Finally, insert the key in the ignition and turn it so that the electrical systems are powered on but the engine is off. Repeat this 10 times until you hear a sound on the instrument panel. This will put the system in programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button

For some owners, the annoying sound heard when locking or unlocking the subaru impreza key fob replacement key fob from outside the vehicle may be distracting. In some cases you can deactivate the chirp by opening and closing all doors by double-clicking on the lock button on your key fob.

Switch the ignition off and shut all doors as well as the fuel-filler lid. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a sound when this is achieved. The chime signifies that the fuel-filler lid and door lid are locked. It is possible to alter the setting to make the doors lock automatically and without pressing a button.

Step 8 Step 8: Enter the 8-Digit Transmitter Number.

Write down the first series of 8 numbers and keep it handy. Now, get in your driver's chair, close all the doors and then turn the key to the first position (towards on). After ten turns, your instrument panel should start to sound at least once.

Then, open the case for the key fob and find the circuit board for the transmitter inside. There are usually two or three sets of numbers (8-digits) on the circuit board. Follow the instructions in the guide to register the code. This procedure may require a visit to the dealer for older models.