How to Change a Subaru Spare Key

If you have lost your Subaru car key, contact a locksmith. Usually, they can cut a new key for you for less than the dealer.

Subaru car keys are typically either smart "push-to-start" fob remote keys or plain metal keys. The Fob keys will need to have its chip modified.

Keyless Entry System

A key fob lets you to lock or unlock your subaru smart key replacement from a distance. It can even open the trunk or lift gate of your vehicle. These remotes use a keypad in your car to connect to the computer in your vehicle.

Some models of Subaru offer a less-known feature called PIN Code Access. You can choose a personal number sequence to open and start your vehicle. Read the owner's manual to learn how to use this feature if you own a Subaru Forester, Outback Crosstrek, WRX STI or Impreza.

It's possible that the battery inside the key fob has gone out. You can test the battery life of your key fob by using the portable tester or multimeter that you have in your garage.

Next, you'll want to remove the key fob from its case and inspect its transmitter circuit board. You'll see two or three sets of 8-digits. Note the first so you remember it. Once you've done that take the key fob back together and you'll be ready to begin programming it at home. This procedure is different based on the model and year your vehicle. However, it's usually easy enough to do yourself.

Key Fobs

Subaru's latest models come with key fobs that not just unlock doors, but also activate your lights, lock the gas cap, and even start your vehicle. This last feature is particularly useful if been at a gas station and your car wouldn't even start because the battery in the key fob has gone out.

Whether your Subaru is new or old, it's likely that the key fob is able to be replaced with minimal difficulty. Be aware that some of the more modern models, which have the latest technology, might require visiting a dealer. However, with just a little time and effort, you can find a replacement key for subaru forester key fob to use at home.

Begin by looking at the circuit board of the transmitter in your key fob (instructions to open the case are provided in your owner's manual). It should contain two or three sets of serial numbers each one of which is 8 digits long. Keep the first series of numbers on hand for future references.

After that, get in the driver's seat, and close the doors. Turn the key to start your vehicle, then turn off after 10 turns. Press the lock button on your key fob and then open the door to test that your doors are working properly. Close the door, then remove the key. You should hear your vehicle chime again, indicating that the key fob has been programmed.

Ignition System

The key battery may be dead if your Subaru keys don't work as they should. If you are aware of the issue, you can replace the battery in your key fob yourself. A replacement battery is inexpensive and easy to locate. If the key fob doesn't respond to your commands It could be a different problem. To find a spare key, it's advisable to go to an authorized dealer. They'll make sure that the key is genuine subaru Remote key replacement key that's covered by warranty and will be programmed to your vehicle. This is far safer and more convenient than purchasing an aftermarket key from an organization on the internet.

You can also have the dealer cut a new key if you provide them with your VIN number as well as proof of ownership. They'll use this information to program the replacement key in order to be accepted by the immobilizer. This is a much more complicated process than cutting a key by hand and the dealer will charge you more for it.

Once the new key is programmed and you're able to change it over to your existing key. It will take only five seconds to insert the second key, so it's essential to keep a working key on hand. You can remove the key after the security light been off and you've tested it.

Battery Replacement

One of the primary features that makes subaru key programmer fobs useful is their ability to turn on your car's power windows and sunroof at the touch of a button. The battery inside your Subaru fob isn't designed to last forever, and will need to be replaced at some point. This quick guide from Capitol subaru xv replacement key will help you to change the battery yourself.

You'll need to locate the small gap that divides the front from the back of your keyfob. You can cut this seam with a flathead screwdriver and reveal the small compartment that houses the battery. Remove the old battery and then replace it with a fresh one, making sure it is facing the correct side up. Once you have assembled everything is in place, you can use your new key fob for locking the vehicle, unlocking it, and then starting your vehicle.

It's always a good idea to have an extra set of keys on hand especially if you've lost yours or not working properly. A new key can easily be purchased at your local auto dealer or you can request one made by the locksmith. It is crucial that your key fob is working correctly as soon as you can so that you can drive safely.