How to Replace the Replacement Key Battery For the saab fob key replacement 9-3

saab 900 key owners must follow a set of steps that are unique to add a second ignition key. This requires the use of a handheld computer called Tech-2, to be used by the dealer. Then the transponder must be replaced and a key must be purchased.

Rotate your keys to stop one from wearing out faster than the next. This will also help to keep your keys in top shape.

Replacement Case

Unlike the classic Saab keys of the past keys, the new key fobs contain electronics which makes it difficult to duplicate. This has made theft of cars significantly more difficult than 20 years ago. But, it has also made replacing lost keys an incredibly expensive undertaking.

Every owner of a 9-3 Saab should have at least two functioning keys. It is expensive to replace a lost key, as it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers typically charge between $100 and $200 to complete this.

There are ways to reduce the high cost. Some parts providers will find the code on an old key (usually the same one that opens the doors and turns off the ignition) and cut a brand new metal key blade at only a fraction of the dealer's cost. The key, however, must be the same as the original in order to function in your car.

You can also replace the case yourself by following these steps. You'll require a flathead screwdriver as well as some patience. With the screwdriver, pry apart the plastic, and then take off the emergency key. Once the case is open remove all electronics and put them back in your new case. Make sure you insert the correct key and badge into the case.

Replacement Battery

The replacement battery for the Saab 9-3 is an affordable part that can be replaced quickly and easily. This YouTube DIY video Cyclone Cyd shows how to replace the battery for the remote key fob in only four steps. This guide should work with any modern saab key fob although the process might differ slightly.

The first step is to locate the button that will release the backup key in the fob. This button is usually on the back of your fob next to the saab 9-3 key fob replacement Logo. Then, use a flathead screwdriver into the tiny hole in this button. This should be enough to open the fob case so that you can replace the battery.

Once you have installed the CR1632 batteries, you can put back together the remote key fob. You can then program it into your car. The entire process shouldn't be more than an hour. It's a simple procedure that doesn't require any special equipment.

If you lose a key, the procedure will be slightly more complicated, but it can still be completed. The dealer will have to read the car's VIN and then order a replacement key blade and TWICE module, both with the correct unique code. The dealer will then have to program the key using MDI an innovative software tool.

Replacement Key Fob

The key fob has batteries that are used to lock and unlock your car. The batteries have a lifespan and will eventually fail. This is a common problem that occurs with all vehicles and the good thing is that you can change the batteries in a majority of key fobs without replacing the entire case. You can purchase fobs replacements on Amazon that have all the electronics already in place, so you'll simply open the case and replace the batteries that were in the case. It is necessary to remove the emergency key before you replace the batteries. To do this, insert a small screwdriver that is flat into the slot that is in the middle. Work the screwdriver around the case until it will split open, making it easier to take it out.

If you're ready to change your keys, keep a spare available. This will save you a lot of money. If you have an additional key, request the dealer to cut it in half and program it to your vehicle. This is much less expensive than buying a new key fob.

If you don't have a spare car key, you can add a second key to your car, however it requires a lot of research and effort. The cost of adding a second key is around a hundred dollars and also requires programming of the car's computer. Professionals can accomplish this however, it's a costly option.

Replacement Ignition

The new SAAB 9-3 uses a more sophisticated alarm system built on a keycode. This means that in the event that you lose your only functioning key, getting an additional one could be extremely expensive as the car has to have a computer module fitted and also needs to be specifically programmed to accept a new key. Locksmiths typically aren't able to program this or even dealers will charge hundred dollars to program the new key!

Dealers will charge you a high price to replace your car's computer (also called the CIM or saab spare key twice) If you lose your sole working key. Instead we can reprogram the EEPROM on your existing car computer to prepare it for an additional key, and save you over 50% of what you'd spend at a dealer.

If you have owned a car like the saab car key replacement 9-3 for an extended period of time, you know that the ignition keys aren't very durable. If your ignition key isn't functioning properly, it is time to think about replacing it. They can become very sticky and the buttons can fall off. It's not so difficult as it may seem to replace the ignition key. With the proper tools, it can be accomplished in a short time.