How to Change a Subaru Spare Key

If you have lost your subaru keys made car key, contact a locksmith. Usually, they will cut keys for you much less expensively than the dealer.

Subaru car keys are generally either intelligent "push-to-start" fob remote keys or plain keys made of metal. The Fob keys have a chip in it and it will require reprogramming.

Keyless Entry System

Key fobs allow you to lock or unlock your Subaru from a distance and could even unlock the trunk or lift gate of your vehicle. The remotes utilize the keypad inside your car to connect to the computer in your vehicle.

Some models of Subaru have a feature that is not widely known called PIN Code Access. This lets you utilize a personal number sequence to open and start your car. Go through the owner's guide to learn how to utilize this feature if you own a subaru lost key fob Forester, Outback Crosstrek, WRX STI or Impreza.

If your keys stop working, there's a good chance that the battery in the key fob is dead. The first thing you'll want to check is that it's got new batteries and you can accomplish this with a portable remote tester or a basic multimeter in your garage at home.

The next step is to take the circuit board for the transmitter from the key fob to examine it. This board will have one or two sets of eight-digit numbers, so jot down the first set so that you can recall it later. Once you've finished, put the key fob back together and you'll be ready to start programming it at home. The procedure for programming differs based on the make and year of your car but it's usually easy enough to do by yourself.

Key Fobs

Subaru's latest models all feature key fobs that don't just open the doors but also activate your lights, lock the gas cap, and even start your vehicle. This is particularly helpful if you've been at the pump only to find that your car isn't starting because the battery for the key fob failed.

It is likely that your Subaru's key fob, whether it is old or new, can be easily replaced. Be aware that some modern models, with their advanced technology, might require a visit to the dealer. With just a bit of effort and time, you can create your own replacement key fob.

Start by opening the case and inspecting the circuit board of the transmitter. (Instructions on opening the case are usually given in the owner's guide). It should have two or three serial numbers each of which is 8 digits long. Keep the first series of numbers on hand for future information.

Then, get into your driver's seat and close all the doors. Turn the key to start your car, then turn it off after ten turns. Press the lock button of your key fob, and then open the door. This will verify that your doors are working correctly. Close the door, then remove the key. You should hear your vehicle buzz again, which indicates that the key fob is programmed.

Ignition System

If your Subaru keys aren't functioning as they should, it could be because the key battery is dead. If you know how, you can replace the battery of your key fob yourself. The replacement battery isn't expensive and easy to locate. If the key fob doesn't respond to your commands, it could be replacing a subaru key different issue. It is recommended to visit a dealer to get a spare key. They'll ensure that the key is an original Subaru key, under warranty, and is programmed to your vehicle. This is much simpler and safer than getting an aftermarket one from a business online.

You can also ask the dealer cut a new key if you supply them with your VIN and evidence of ownership. This information is used to code the key replacement to ensure that it can be accepted by your immobilizer. This is a more complex process than cutting replacing a subaru key key by hand and the dealer will charge you more for it.

Once the new key is programmed, it is possible to switch it over to the working key. It will only take you five seconds to insert the new key, so keep your working key close at fingertips. Once the security light stops flashing and you're able to remove the new key and examine it to make sure it's functioning properly.

Battery Replacement

One of the primary characteristics that make Subaru fobs so valuable is their ability to switch on your car's power windows as well as sunroof with a single touch of the button. But, the battery in your Subaru key fob is not meant to last forever. It will eventually require replaced. Fortunately, changing the battery is a simple process that you can complete yourself with the help of this quick guide from Capitol Subaru.

To begin you'll need to find the small crevice within the seam that divides the back and front of your key fob. You can open this seam with an flat-head screwdriver to expose the small compartment that houses the battery. Remove the old battery, and then install a new one, making sure that it is facing the correct side up. Once everything is reassembled, you can use your new key fob to lock, unlock, and start your vehicle easily!

Always have a spare set keys, especially if one is broken or has gone missing. You can purchase a brand new key from your local dealership or have it cut by a locksmith. It is important to ensure that your key fob works well as soon as possible so you can drive safely.