Repairs to uPVC Windows

upvc window repair windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They do not get rotten or rusty like timber and aluminum.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. However, if windows with double panes are anchored by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and fix the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap between the window and the door is large, you might prefer an alarm system that includes an opening. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time they can suffer from a variety of problems including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll have to open the window so that you can access the frame. After that, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in the right place.

If you are unable to move the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. It is important to replace your seal as soon as you can to ensure that your upvc window repair window watertight and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the mechanism of the handle wearing out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and perform an experiment fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and wet floors. Water leaks from windows are not just a cause for destruction of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be fixed by a upvc window repair window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens in an ease. They can be replaced by any competent DIYer and can usually be done within a few minutes.

Like all mechanical parts hinges will be damaged over time. It's easy to change the hinges on a window however it is simpler if you have someone to help you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused due to opening the window in the wrong way or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be more than happy to give you advice.

It is also crucial to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become disaligned as a result of wear, creating a gap between the frame and sash. If they are beyond repair, it may be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window, can also become misaligned, again it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The next most common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the possibility of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and they may reach a point where it is more cost-effective to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as possible.