Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. However when windows with double panes are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this situation it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the glass panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the home until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap between the door and the window is substantial, you may need to consider an alarm system that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they can suffer from a variety of problems including sagging. A window that is sagging can cause problems with light, draughts and even security. It's important to take action when you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll need open the window to access the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fit. If you're happy with the fit, you can tighten the screws to ensure they remain in position.

If you cannot reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. Most often it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close the window and do a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's crucial to take action. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by any DIYer who has the ability. Based on the severity of the problem the caulking used previously may require removal before a fresh layer can be applied. It is crucial to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to note that if the leakage originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily corrected by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your upvc window repair near me window is difficult to open or if it opens in the breeze. These are easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to change the hinges on a window, but it's simpler if you have someone to help hold the frame.

Check that the uPVC hinges open and close in the right direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should open.

The issue could be caused either due to opening the window in the wrong way or by a poor installation in the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you suggestions.

It is also essential to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. The ideal time to perform this every year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc window repairs near me windows can be caused by a few various factors. The hinges can also become misaligned due to wear, causing an opening between the frame and sash. If they are beyond repair, it may be necessary to have them realigned. In addition, the interlock could also become disaligned. This happens on the hinge's side, and could require to be cleaned. In certain instances it might be necessary to replace them.

The second most frequent reason for draughts is window seals. These can become worn down or damaged over time, and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair windows made of upvc window Repair will continue to provide a great level of insulation and security for your home. It is crucial to recognize that windows last for a certain period of time and eventually, they will reach the point when it's more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as possible.