Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you plan attempt to remove the window panes by yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any fragments of glass fall onto the cloth instead of onto the floor, where they could be trodden under and cause further damage.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from getting into your home until a professional arrives to fix the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap between the window and the door is large, you might want to use a security screen that also has an opening. This will provide the best of both.

2. Sagging

upvc window repairs near me windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. However, with time, they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

To repair a window repairs near me that is sagging, you can try repositioning the hinges. You'll first need to open the windows to access the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit of the window, you can tighten screws to keep them in the right position.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. It is essential to replace your seal as quickly as you can to ensure that your upvc window repair window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can be caused by the handle mechanism getting worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to close the window and then perform an initial test fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it is important that you take action. The leaks of water from windows do can not only cause destruction of your home's structure but also hinder your efforts to regulate the temperature within your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking may have to be removed. It is important to remember that when it is about upvc window repair near mewindow repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leakage is coming from between the glass in your double glazed window repairs glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. Again this can easily be repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens in a breeze. They can be repaired by any skilled DIYer and can usually be done within a few minutes.

Like any mechanical part hinges are prone to be damaged over time. Changing a window hinge is an easy process, but it's easier to do when you have a person to help you hold the frame up.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or by a poor installation in the factory. This can often be resolved by sending us a photo through our website and we will be happy to give you advice.

It is also essential to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also reduce the chance of windows sticking and prevent corrosion. It is recommended to perform this every year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different things. Firstly the hinges, again because of wear and tear, can become misaligned, this causes an opening to appear where the sash joins the frame. This can be easily repaired by giving them good clean, but when they're beyond repair, it may be necessary to have them aligned or replaced. The interlock may be unbalanced. This happens on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace the hinges.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric filled with some sort of filler and can be positioned on top of your windowsill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair windows made of upvc will provide excellent security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it could be more cost-effective to simply replace them than to repair them. If you encounter any issues with your window made of upvc you should consult an expert immediately.