How to Replace a Subaru Key Fob

For those days when you don't want to carry around your locked keys in subaru forester when going mountain biking, hiking or kayaking, newer Subaru Foresters, Outbacks and Crosstreks have an option that isn't widely known. This handy feature lets you lock your car and leave it in a safe place.

You can purchase the replacement Subaru key fob at a hardware store or online. You can visit a Subaru dealer for a more customized service.

How do you replace your subaru outback key fob key fob

Whether you've lost your key fob or just need to replace its battery, a few steps can assist. First, make sure you have a new battery (ideally CR2032 3V) prepared, along with a screwdriver. A spudger is often needed to remove the circuit board from the case of the key fob. Refer to the owner's manual for your car to make sure you are using the correct battery for your vehicle before trying to replace it.

Then, push the small silver button on the back of your Subaru key fob to let go and pull out a metal key. Insert the tip of a screwdriver into the slot to create the gap between the body of the key fob and its front. This allows you access to the internal components. Take off the key's metal part and use a screwdriver to break off one of the housings that house the control module that houses the battery.

After the housing is removed take the flat round battery inside. The battery should be visible because it is held in place by tiny tabs. Replace the battery that was in use with the new one. Make sure the number is facing upwards. Reassemble the key fob, and test it to see if it works. In most instances, your car should be able to chime and the locks will engage when you press the lock button on the key fob.

Why Visit a Dealership to replace a Key Fob?

Subaru key fobs are an easy way to lock and start your vehicle remotely. Like all electronic devices key fobs may break or become obsolete. There are a few alternatives to replace your subaru impreza key fob's key fobs in Bartow or Lake Wales.

First, you must determine the type of fob you own. The older models that have a physical key inside are more teardrop-shaped while the latest models have a bulging rectangular. The case is opened and reveals the transmitter circuit board and battery. Replace the old battery with an entirely new one. Be sure to use the correct polarity and position otherwise your car may not start.

Typically, dealerships have the most extensive software for your vehicle model. They may also provide a more secure replacement. They might charge more since they have greater overhead costs.

You may be able to locate a replacement at an auto parts store or even online. If you opt to go this route, make sure you are aware that Consumer Reports has found some off-brand remotes don't function properly with the system in your car. Many online stores that sell replacement remotes also require proof of ownership to program the new fob. You could also request your dealer or local mechanic to do this for you, however this will cost more.

Why should you visit a Hardware Store for a Key Fob Replacement?

The key fob is a handy device that allows you to unlock your vehicle and get it started without the need for a physical key. Key fobs from Subaru come with several features that make driving easier and more fun. They can lock and unlock the doors as well as start and unlock the engine, unlock and unlock the gas cap as well as turning on the light.

The majority of newer cars include keys that need to be programmed in order to use it. The manufacturer gives these devices unique codes that only locksmiths and dealerships have access to.

When you lose or damage your key fob, the most effective solution is to visit a dealer. They have the software to reprogram blank fobs with a specific model. They can also cut the key for you, and place it inside the fob.

If you want to try and save money, a few online sellers sell blank key fobs that they are able to program for you. They aren't as reliable as those that are sourced directly from the dealership, however.

The first step is to note down the 8-digit transmitter number that is located on the top of your driver's side door sill. Once you've written down your first digit, get in your car and press the lock button as many times as it takes to match the digit. Repeat this process until you have completed the number. After the last digit is entered, remove the ignition key and listen for a sound to come from your dash to show that the system has been properly programmed.

Why should you visit a subaru keys made Dealership for a Key Fob Replacement?

While a basic key with an cylinder that is attached to the car fender is the norm, many drivers now choose to use an electronic key fob that can lock, unlock and, in some cases, starts their vehicles. The fobs transmit signals to the vehicle through multiple antennae. The transponder chip is used to verify the driver's permission. This is why many of the newer models require that drivers visit a dealer to have their fobs replaced, according to Consumer Reports.

Although this might seem like a hassle, it's a more sensible option to consult with the dealer to make sure that you get a valid replacement key fob as well as to ensure that your vehicle is programmed correctly for the key fob. It's also possible to have the cost of a replacement or duplicate fob covered by the car's warranty, which will save you money in the end.

Before you attempt to replace your Subaru key fob battery, look inside the fob for a tiny gap in the seam that separates the back and front of the fob (instructions for opening the fob are in the owner's manual). Once you've located the spot and you've found it, use a flathead take the fob apart. Then, take out the old battery and put the 2025 battery in its place. Finally put the fob pieces back together.