How to Unstick a suzuki smart key ignis key (you can check here)

suzuki key fob replacement's quirky, affordable city car is getting a midlife update. It's not a hot hatch, but it's able to handle the tarmac in rural and urban areas well. Its tight turn-in circle makes driving in the city easy.

The new model also comes loaded with intelligent driver assistance and safety technologies - including lane depart warning as well as a sleepiness alarms, which are great additions on long drives.

Steering Lock

The steering lock is a security measure that prevents your Ignis from being stolen when it's in gear. It's an important safety measure however it can be frustrating when you have to get to a location and you are unable to unlock the wheel. There are some simple actions you can take to fix the issue.

In the beginning, make sure that the ignition switch is in the "on" position. Then, if it is, then try to turn the key in the direction you were turning before the wheel got locked. This could be difficult however it's typically enough to unlock the wheel.

If the wheel doesn't unlock after spraying canned air in the ignition cylinder, you can make sure that the cylinder is lubricated. Make sure you wear eye protection when doing this to ensure that you don't get any air that has been sprayed into your eyes! You can also use liquid graphite to lubricate your cylindrical.

If none of these works you'll have to replace the ignition assembly. This part can be found in any auto parts shop. Be sure to buy an exact replacement and compare it to your previous one. Also, make sure to remove the cover that covers the ignition to inspect the assembly.

Worn

The steering lock could bind the ignition switch, causing the key to be stuck. This safety feature is designed to keep your Ignis from moving even when the engine is running. If this occurs, you can unbind the steering wheel by manipulating it.

Over time, your Ignis key can wear out and become more difficult to turn. This may not be as common as a defective ignition switch, but it can occur. If this is the case, it is recommended to replace your key.

Also, check if there's obstructions that are preventing your Ignis key from entering the ignition cylinder. There may be dirt or debris that can get stuck inside the ignition cylinder preventing it from turning.

Try a little lubricant to see whether it will help. You can find a wide range of lubricants at your garage or in a local auto parts store.

A silicon "glow-in-the-dark" key cover is another option. These covers absorb light and then release it when the environment is murky or darker. They also protect your key from wear and tear. They are offered for the majority of suzuki swift key fob not working models and can be purchased online or from a nearby suzuki swift key dealership.

Bent

Over time and with repeated use, a key may become bent. This could cause the teeth on the key to not be able to engage with the lock cylinder in the same manner and stop the key from turning the ignition. If this is the case the key will have to be replaced. It is a good plan to duplicate the spare key and store it in a secure area.

The ignition cylinder can also wear out. If the lock pins inside are stuck or jammed together the cylinder may be unable to allow a key from going all the way into or out of the cylinder. This can be resolved by replacing the cylinder however, it is recommended to replace the cylinder prior to the key gets stuck in the ignition.

If your Ignis keys remain stuck, even after you've tried the simplest solutions it could be time to lubricate the cylinder. Graphite or liquid graphite can assist the lock pins in being able to move more freely, and ultimately loosen your key. This is readily available in a majority of auto parts shops. Be sure to put your Ignis into park before applying the oil. Don't try to use your hands to free it. This could lead you to more serious problems.

Broken

If you've tried everything to get a key off, but it doesn't work the key, your final option is to try a oil. You can purchase this lubricant at a local auto parts shop and apply it with a cotton swab or cloth to the inside of the lock cylinder. Move the key back and forth gently to spread the lubricant around and then try again. Try to massage it forward, but be cautious not to press too hard or you could damage the cylinder.

It is also possible that the key's internal circuitry can become unresponsive as time passes. This isn't as frequent and typically means that you'll need to have the key duplicated for another one.

The case of your suzuki swift smart key programming keyfob can also become damaged or worn. This is most likely especially if you're using a cheap replica key fob with a plastic or rubber shell. The Key Crew may be able to migrate the internal circuitry of your old keyfob into a replacement case depending on the circumstance. This will reduce the expense of purchasing a new keyfob. When we call you to set up your service, we'll inform you know if this is a viable option.