How to Programming a Subaru Key Fob at Home

The key fob to be programmed by an auto locksmith or Subaru dealer, depending on the age of your Subaru is. This is accomplished by connecting a computer-based programming machine to your car.

To program your Subaru car, you must open the driver's side door using the door button, and then close it. You will hear a chime in the instrument panel, and the dome lights will flash.

Step 1: Locate the circuit board of your transmitter

There are a variety of ways to program your keyfob. First, you must determine the type of key fob that you own. This can be done by looking at the design of the key fob or by listening for a buzz in your car.

Once you have the data, you can begin the process of programming your keyfob home. To accomplish this, you'll need a metal key and a screwdriver that has a flathead. You can open the key fob by twisting. Then push the key made of metal in and pull the battery from the small tabs that secure it. Replace the battery with a new one, and then put the key fob case back together.

Step 2 Step 2: Unscrew your Key Fob Case

It is an ideal idea to change the battery in key fobs when they are not working. In some instances the buttons on the key fob could be broken. If you notice the button's contacts made of metal have been damaged You can try reconnecting them to make them work again.

Make sure you turn off your ignition and close your doors prior to you begin. Close the driver's side doors and press your door button 10 times in rapid succession. After that, you'll hear the instrument panel chime and the dome lights will light up. This indicates that you are prepared to move forward.

Step 3. Insert the fob for the key into the ignition

There are many articles online that give you instructions on how to program a Replacement Key Fob subaru or new subaru impreza key fob replacement key fob at home, but they are not particularly specific. Reprogramming an electronic key is best handled by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat with all doors closed and the engine turned off. Use the door button to unlock all doors. Close and open the driver's door a second time. Then insert and remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will chirp to confirm that the settings have been changed.

Step 4: Turn the ignition On.

It is important to know that this method of programming a key fob is effective if you have a functioning key. If not you can find an auto-locksmith or dealer who will have to program keys for your Subaru Fort Bliss.

After the key is programmed, it should be able to start your vehicle in about 5 minutes. To begin, make sure all doors are closed and the engine is turned off. Assume a seat in the driver's chair and open all doors using the button on the door. Insert the key into the ignition and then turn it to the first position. The electrical systems will be activated however the engine will remain in neutral. Repeat this process ten times.

Step 5 5. Unlock the Door of the Driver's Door

Subaru provides a variety of premium cars equipped with key fobs that can lock and unlock the doors and start the car and defrost the windows. However, at times, these devices stop working properly.

To fix the issue to resolve the issue, you should call an expert locksmith or dealer. This will solve the issue and ensure that your vehicle is safe.

To do this, you must open the driver's door, then close it. Then, place the ignition key and move it to the first position. Then, you can turn it back to the off position. Perform this as fast as you can 10 times. After the tenth repetition you should hear a sound.

Step 6 6. Press the Lock/Unlock Buttom on the Driver's Door

If you are looking to replace subaru key the battery in the lost subaru key fob key fob, the process is straightforward. Unlock the exterior fob case. Use a flathead for prying the case's interior open and then remove the old batteries.

After you have removed the old battery, put in the new one and close the case. Relax in the driver's seat and unlock all doors using the door button control. Then, put the key in the ignition and turn it so that the electrical systems are powered on but the engine is off. Repeat this ten times until you hear the chime from the instrument panel. This puts the system in programming mode.

Step 7: Press the Passenger Door Lock/Unlock button.

For some owners, the annoyance sound heard when locking or unlocking the Subaru key fob from outside the vehicle can become distracting. In some instances the chirp may be removed by closing and opening all doors and a double click of the lock button on the key fob.

Close all doors including the lid that holds the fuel, and turn off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. After that, the instrument panel emits an audible chime. The chirp signals that the lid of the fuel filler and door are locked. The setting can also be changed so that the doors and lids for the fuel-filler are locked automatically without pressing the request switch.

Step 8: Enter your 8-digit Transmitter Number.

Keep the first 8 numbers in your mind. Now, get into the driver's chair, close the doors and turn the ignition to the first position. After 10 turns, your instrument panel should chime for a single time.

Next, open the case for the key fob and find the circuit board that controls the transmitter. There should be two or three sets of numbers (8-digits) on the circuit board. Follow the steps in the guide to register the code. For older models, this procedure may require a visit to the dealer.