Replace Nissan Key Fob Batteries

If your Nissan keyfob doesn't respond to your commands, then its battery may be dead. This is a repair that most people are able to do themselves.

You can purchase the replacement from a local hardware store or from your owner's manual for the specific model you have and you'll need to follow these steps for changing the battery.

Removing the Battery

The key fob on your Nissan model has an inbuilt lithium battery that will eventually lose charge. The battery for the key fob can be replaced in just a few minutes. You'll first need a CR2032 battery. It's a tiny coin cell battery that is commonly used in key fobs, and can be found in a variety of convenience stores. To open the key fob, you will also require an appropriate pair (latex or not) of gloves as well as a small screwdriver with a flat head. Consult your owner's guide for more detailed instructions and steps before you begin.

Turn the fob upside down and look at the backside. You will notice a small latch that you have to unlatch by pulling it down. This will open the mechanical key from its original position inside the fob.

Next, insert the new battery and ensure that it is in the correct orientation. Close the fob once the battery is in place and press the two sides of the fob together. Test your key fob after completing this step by pressing the unlocking button. If everything is in working condition, you're able to take advantage of the Nissan Maxima Remote Start's numerous features. After replacing the battery, it is a good idea to re-program your key fob to ensure that it's functioning properly.

Replacing the Transmitter

With your key fob acting as the "key" to many of your car's most important functions, it can be a big blow if you misplace or damage it. A damaged or broken key fob can prevent you from locking and starting your vehicle.

It's a great idea to keep a spare key fob around in case of emergency. Fortunately, the process for replacing your Nissan key fob is fairly straightforward. The procedure for replacing your Nissan key fob is quite simple. You will need an additional flathead screwdriver as well as the new battery to get rid of the old.

You'll require an oval Panasonic CR 2032 3V battery (you are likely to find them in multipacks for under $5 USD). The battery is in the back of the key fob. You'll require a small flathead screwdriver to gently separate the two halves. Use a small flathead screwdriver and pull the clip on top of the battery and lift it out, making a note of the location. Replace the battery and put the key fob back together. You can test it to ensure that it works correctly.

As with any electronic device that you own, like all electronic devices, your nissan patrol key replacement Intelligent Key will eventually wear out over time due to normal use and need to be replaced. Protect your key fob against water, magnetic fields and physical impacts. Don't drop it or apply too how much is a replacement nissan key fob pressure to the device.

Replace the Key

If your Nissan key fob is dead, you can't use it to unlock or start your vehicle. This is a problem for people who have to go to work in Detroit or to run errands in Dearborn.

The good news is, the battery inside your Nissan smart key isn't that difficult to replace. You can replace the battery at home or at the dealership. A pack usually costs $5 or less.

Begin by flipping over the fob and pressing a small catch on the back. This will release the emergency mechanical key inside. Although you won't be able to use the emergency key to start your vehicle, it will let you open the door.

Next take a look for a small gap on the top of the key fob casing. You can use a screwdriver for prying away the two parts of the key fob. Once you have access to the internal battery, pull it out and keep track of its location. When you're ready to reassemble your key fobs, slide the new battery back into its place and then snap the two pieces of the case. Insert the mechanical key and your Nissan smartkey will work as usual.

Other Problems

Many modern vehicles come with key fobs, which let you to lock them and open them without a physical key. The key fob works as the transmitter to communicate with the computer system of the car.

There are several possible reasons for why your Nissan key replacement nissan fob does not function after replacing the battery. One possibility is that the new battery wasn't properly seated into the key fob. Resetting the key fob is another possibility. This is an easy process that you can do at home with a few simple tools.

For instance, you'll require a screwdriver, and preferably one with a flat-headed head to remove the key fob, and then remove the battery that was in there. Then, you'll need an open-ended screwdriver the back of the key fob to insert the new battery. After that, you'll need to modify the key fob's programming so it works with your vehicle.

Fortunately, the majority of Nissan key fobs are programmed by the user and you can do it yourself. You can usually do this by inserting the key fob in the ignition twice in five minutes. If this doesn't work, you can bring your key fob to a dealer or auto locksmith to have it programmed. The cost of this service will depend on the person you call and the type of car you own.