Subaru Impreza Key Problems

The Subaru impreza key permits owners to lock and unlock their car by pressing a button. The most frequent reason for the key fob to stop working is a dead battery in the key fob.

It is easy to replace the battery. Find the small battery that is the flat round cell inside the casing for the key. Replace the battery by opening the device and making sure that the right side of the battery is facing up.

Keys Stolen or Lost

We've all had this experience where you reach into your pocket to retrieve keys, but they are not there. Fortunately, it's not too hard to find your Subaru keys and there are many options to replace them quickly and cost-effectively.

If you already own a standard metal car key, you can get it duplicated at a store that has Subaru blanks. They are typically marked "Subaru Replacement Key Cost". You may need to replace the battery in your key fob also in which case you'll require a CR-2032 replacement that is readily available at all hardware stores, as well as some retailers, such as Amazon.

For the key fob or remote/intelligent key, you'll need visit an auto locksmith who can make new keys for your Subaru model. This will cost you between $50 to $250, based on whether your Subaru comes with a transponder chips or smart key feature.

To get a new subaru key key programmed, you'll have to give the locksmith or dealership your vehicle identification number (VIN) that is located on the dashboard close to the windshield. This number is needed to confirm the status of your vehicle's warranty and ensure that the key has been properly programmed for your Subaru model and year. The VIN provides information about the manufacturer and the country where the car was manufactured. It also informs you if there are any special features on the vehicle like immobilizers, which stop the engine from starting when a key that is not correct is used.

Faulty Key Fob

There are many reasons why the key fob isn't functioning correctly. It may be a straightforward issue with the battery or it may require a more complicated repair. Common issues with the Subaru key fob include the battery has failed, programming issues with the car, or electrical issues in the vehicle.

The battery on the key fob can be easily replaced. These are available in a variety of big-box retailers as well as hardware stores. These cost around $10 each and can be replaced in a matter of minutes. The owner's guide should include instructions on how to get a new subaru key to do this. YouTube has a variety of videos that will guide you through the procedure.

Water damage to the key fob is another possible cause. The clips made of metal that secure the batteries could be damaged if you remove it from your pocket and then get it wet. If the key fob is still having problems after replacing the battery, it could be related to the circuit board that controls the transmitter or other parts in the vehicle. A technician skilled in troubleshooting vehicles can check this and find the problem. They can reprogram the key subaru fob and make sure that it works with the vehicle. They can also examine for antenna or wiring issues that could prevent the key fob from transmitting signals correctly.

Locking or Unlocking Issues

If your Subaru Impreza key fob won't unlock or lock the doors, it could be a range of reasons. This issue can be caused by a dead coin battery, malfunctioning module as well as signal interference or water damage. You may have your key fob programmed by a locksmith or dealer.

If you are unable to access the trunk, the key fob may have the trunk lock setting set to "on". This is a security feature which prevents thieves from taking the vehicle. Contact your SUBARU dealership to alter the settings for the trunk lock and unlock.

Another cause of the steering wheel becoming locked is when you make a sudden turn and the vehicle locks itself automatically. This happens when the car detects an abrupt turn. It can cause damage to the transmission system as well as engine. Slow down when turning to avoid this.

Make sure you check that the replacement keys or spare key that you have was cut and programmed by the locksmith or dealer. Also, ensure that the emergency key is working on all trunks and doors, as these are the only means to access the car if you're locked out. Verify that the spare or the new one does not have any scratches or signs on it.

Keyless Entry

Many subaru key fob replacement models come with keyless entry. This lets you lock or unlock the doors and trunk by pressing the remote. The system works by using a short radio signal that communicates with the vehicle when you're within range of it. There are a number of different systems available that provide this feature starting with the basic ones that only unlock the door for the driver to more sophisticated ones which also permit remote starting and smartphone integration.

Having keyless entry on your subaru key fob replacement is convenient and safe However, it's essential to be aware of what to do if the buttons stop working properly. It's possible to troubleshoot at home, but you may need to take your Subaru in for a professional diagnosis. In the meantime, you can follow these tips to help keep your car's remote control working as it should.

If your Subaru's key fob gets wet, it's a good idea to clean the electronic chip of it with isopropyl alcohol and let it dry completely before putting the battery back in. This will stop moisture from damaging the fob or causing problems in the future.

If your key fob has stopped responding, switch off the engine and then open the door of the driver. Press the door button once to open it, and then press it again to close it. You will need to press the button a handful of times generally one for each digit, until you hear the sound. Then, repeat the procedure with each door until receive a response from each of them.