Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it is fairly easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that will assist the new pane to fit properly into the window frame.

If you plan to attempt to remove the window panes by yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor, where they could be trampled under.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap is large, you might be interested in the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from worsening.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. After that, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

upvc windows repairs handles can also loosen up. This is typically caused by screws that have loosened over time, but it can also be due to the handle mechanism wearing out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. The first step is to close the window and perform a test to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. Windows that leak water do can not only cause degradation of your home's structure but also hamper your efforts to control the temperature in your home. The most common cause for leaking upvc windows repairs windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer of caulk is applied. When it comes to uPVC repair, it is important to avoid over-caulking. This can make your window harder to clean and reduce its energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, Window Glass Repairs you might need to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread across the home.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. This can be easily fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze it could be the hinges that are at fault. They can be repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is essentially a very simple process, but it's easier when you have a person to help hold the frame up.

Verify that the uPVC hinges are closed and open in the proper direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should open.

Faulty window hinges can be caused by incorrectly opening the window a certain manner or because of poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to give advice.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc doors repairs near me windows can be caused by a few different factors. The hinges may also become disaligned as a result of wear, which can cause an opening where the sash meets frame. These can be easily fixed by giving them a thorough clean, however if they are beyond repair it might be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, may also become misaligned, again it's possible to just give them a good clean, but in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce the risk of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically fabric tubes which are filled with a type of filler. They can be placed on the windowsill on top. These will keep your home warm by blocking cold air.

With a little maintenance and repair your windows made of upvc will provide excellent insulation and security for your home. However, it is important to recognize that all windows have a life span and there may come the point when it's more efficient to replace them than fix them. If you are experiencing issues with your upvc window you should consult a professional immediately.