Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. However If you have double glazed window repairs pane windows that are anchored by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.

Once the glass is removed from the window, it's best to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and fix the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the distance between the door and the window is substantial, you may need to consider a security screen that also has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they may be afflicted by a variety of problems including sagging. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need to open the window so that you can access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and verify the an appropriate fit. If you're happy with the fit, tighten the screws to ensure they stay in position.

If you can't reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's important to replace the seal as fast as possible so that your upvc window repair near me windows remain watertight and draught-proof.

uPVC handles may also loosen. This is often caused by screws that have been removed over time, but it can also be due to the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and then perform an experiment to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's crucial to take action. Windows that leak water do not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue is, the old caulking may need to be removed. When it comes to uPVC repair, it is important to be careful not to over-caulk. This can make your window harder to clean and reduce its energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe instances, you may need to replace the window repair near me.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass in your double glazed window repairs glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your upvc window repair windows are stiff to open, or loose and open with ease It could be the hinges that are at the fault. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical part hinges will be damaged over time. It is very easy to change the hinges on a window but it's much easier if someone helps you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should open.

The problem can be caused due to opening the window in the wrong way or a faulty installation in the factory. This issue can be fixed by sending us a photograph on our website. We will be happy to give you suggestions.

It is also crucial to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges, also due to wear and tear may become displaced, which can cause a gap to form where the sash meets the frame. If they are beyond repair, it could be required to realign them. Secondly the interlock, this is located on the hinge side of the window, may also be misaligned, and again it may be possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next common reason for draughts is window seals. They can become worn down or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking cold air.

With a little maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it may be more cost-effective to simply replace them than to repair them. If you are having issues with your upvc windows, it's recommended to seek help from a professional immediately.